Exhaust Assy. Removal; Removal Of The Engine From The Vehicle - PIAGGIO Beverly 250 USA Workshop Manual

Engine from vehicle

Exhaust assy. Removal

- Undo the two exhaust manifold fixings on the
head.
- Undo the three screws fixing the muffler to the
support arm.
Remove the full muffler unit.
To refit, carry out the removal operations in reverse order, observing the prescribed tightening torques.
Locking torques (N*m)
Nuts fixing muffler to support arm 27 ÷ 30 Nut fixing muffler to cylinder head 16 ÷ 18

Removal of the engine from the vehicle

- Disconnect the battery.
- Remove seat, side fairings, and footrests.
- Drain coolant.
- Remove the silencer assembly.
- Remove the silencer mounting bracket.
- Remove the rear wheel.
- Remove the shock-absorbers lower fixings.
- Remove the throttle cable.
- Detach the air filter bellow and manifold shown in
the figure.
- Detach engine earth cable.
- Disconnect the electrical devices on the carbu-
rettor and the starter motor power cord.
ENG VE - 2
Beverly 250 USA