Shock Absorbers - PIAGGIO Beverly 250 USA Workshop Manual

Suspensions
Name
Part 1
Part 3
Part 4
Part 5
Engine-swinging arm bolt

Shock absorbers

Removal
Proceed as follows:
- place the scooter on its centre stand;
- lift the engine a little with a jack so as to free the
two shock absorbers;
- remove the muffler
- undo the shock absorber spring assembly clamp-
ing screw from the support fixed to the engine on
the one side and from that fixed to the muffler on
the other;
- unscrew the two upper nuts (one on each side)
fixing the shock absorber spring assembly to the
frame and remove the shock absorbers.
See also
Exhaust assy. Removal
SUSP - 20
SWINGING ARM FITTING
Beverly 250 USA
Torque in Nm
64 ÷ 72 Nm
5 - 7 Nm
90 ÷ 110 Nm
64 ÷ 72 Nm
64 - 72