Installing The Duplex Unit - Canon Laser Shot LBP3500 Getting Started Manual

Installing the Duplex Unit

The duplex unit is to be installed on the rear of the printer unit.
Duplex Unit DU-67
WARNING
Be sure to turn the printer OFF, unplug the power plug, and then
disconnect all the interface cables and power cord from the printer
before installing the duplex unit. Otherwise, the power cord or
interface cables may be damaged, resulting in a fire or electrical
shock.
Installation Space
The dimensions of each part, foot positions, and the space required for using
the printer with the duplex unit installed are indicated in the following figures:
•
Dimensions of the Printer
Front Surface
184
93.8 172.2
121.6 88.6
Tray
Extension
Auxiliary
Tray
Multi-purpose
Tray
32.6 438.7
Sub-output Tray
•
Required Peripheral Space
1193.7
430
325
Installing the Duplex Unit
The duplex unit is to be installed on the rear of the printer unit.
NOTE
The packing materials may be changed in form or position to be placed, or
may be added or removed without notice.
40.6
Auxiliary Tray
Tray Extension
Auxiliary Tray
(mm)
(mm)
Step
6
47