Canon Laser Shot LBP3500 Getting Started Manual page 13

Laser beam printer
Hide thumbs Also See for Laser Shot LBP3500:
Table of Contents

Advertisement

5
Hold the toner cartridge as shown in the figure, shake it
gently 5 or 6 times to evenly distribute the toner inside the
cartridge.
IMPORTANT
If toner is not distributed evenly, this may result in deterioration in print
quality. Be sure to carry out this procedure properly.
Be sure to shake the toner cartridge gently. If you do not shake the
cartridge gently, toner may spill out.
6
Place the toner cartridge on a flat surface, fold back the tab
of the sealing tape a, and then pull out the sealing tape
(approx. 72 cm long) gently b while supporting the toner
cartridge.
Remove the sealing tape by hooking your fingers into the tab and pulling it out
straight in the direction of the arrow.
a
b
CAUTION
If the sealing tape is pulled out forcefully or stopped at midpoint,
toner may spill out. If the toner gets into your eyes or mouth, wash
them immediately with cold water and immediately consult a
physician.
IMPORTANT
Do not pull the sealing tape diagonally, upwards, or downwards. If the tape
is severed, it may become difficult to pull out completely.
Pull out the sealing tape completely from the toner cartridge. If any tape
remains in the toner cartridge, this may result in poor print quality.
When pulling out the sealing tape, be careful not to touch the toner
cartridge memory (A) or not to hold the drum protective shutter (B) with
your hands.
(B)
IMPORTANT
Dispose of the packing materials according to local regulations.
Step
2
(A)
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents