Step 5; Installing The Capt Software - Canon Laser Shot LBP3500 Getting Started Manual

Connecting the Printer
to a Computer and

Step 5

Installing the CAPT
Software
In this section, connect the printer to a computer with a USB cable, and
then install the printer driver.
For details on using this printer in a network environment, see the
following directions.
● Installing the Network Board
See Installing the Network Board: p. 49
● Installing the CAPT Software
See "Chapter 2 Setting Up the Network Environment for Printing" in Network
Guide
WARNING
When plugging or unplugging the USB cable when the power plug is
plugged in an AC power outlet, do not touch the metal part of the
connector, as this may result in electrical shock.
IMPORTANT
•
Do not plug or unplug the USB cable while the computer and printer are
ON, as this may result in damage to the printer.
• This printer uses bi-directional communications while printing. Connecting
to print servers, USB hubs or switching devices that require uni-directional
communication may result in printer error.
•
When starting Windows, be sure to log on as a member of Administrators.
NOTE
•
The screen shots used in this section are from Windows XP Professional.
•
When you connect this printer to your computer with a USB cable, use the
supplied USB cable or a USB cable with the following symbol.
1
Make sure that the printer and computer are OFF.
2
Connect the B-type (square) end of the USB cable to the
USB connector on the printer.
Step
5
29