Canon Laser Shot LBP3500 Getting Started Manual page 22

4
Spread the paper guides a little wider than the actual paper
width.
Step
3
5
Gently load the stack of paper with the printing side facing
up until it touches the back of the tray.
Be sure that the paper stack is loaded under the load limit guides (A).
(A)
CAUTION
When loading paper, take care not to cut your hands with the edges
of the paper.
IMPORTANT
•
The multi-purpose tray can be loaded with up to approximately 100 sheets
of plain paper (64 g/m
the load limit guides.
•
Load the paper so that it is straight.
22
2
). Make sure that the paper stack does not exceed
•
If the rear edge of the paper stack is not properly aligned, this may result in
misfeeds or paper jams.
•
If the paper is curled or folded at corners, flatten it before loading it in the
printer.
•
If you use paper that has been poorly cut, multiple sheets of paper may be
fed at once. In this case, fan the paper thoroughly, and then align the
edges of the stack on a hard, flat surface.
NOTE
To print letterhead paper or paper printed with a logo, load the paper in the
proper orientation according to the following instructions:
( : Feeding direction)
- When loading paper at a size of A4, B5, A5, Letter, Executive, or 16K in
landscape orientation, load the paper so that the printing side is facing
up, as shown in the following figures.