Canon Laser Shot LBP3500 Getting Started Manual page 19

7
Hold down the paper as shown in the figure, make sure that
the paper stack does not exceed the load limit marks (A),
and then set it under the hooks (B) on the paper guides.
Make sure that there is sufficient space between the hooks of the paper guides
and the paper stack. If there is no sufficient space, slightly reduce the amount of
paper.
(B)
(B)
IMPORTANT
The paper capacity of the paper cassette is approximately 250 sheets of
2
plain paper (64 g/m ). Be sure that the paper stack does not exceed the
load limit marks on the paper guides. If the paper stack exceeds the load
limit marks, this may result in misfeeds.
8
Holding the tab of the paper size setting switch, set the
paper size setting switch (A) to the size of the loaded paper.
(A)
(A)
(A)
(B)
A3, B4, A4, B5, A5, 16K
Ledger (11 x 17), Legal,
Letter, Executive,
Custom Paper Size
9
Adjust the paper size register dial (A) to set the dial to the
size of the loaded paper.
(A)
IMPORTANT
•
Make sure that the paper size the paper size register dial is indicating
corresponds with the size of the loaded paper before setting the paper
cassette in the printer. If the paper size that the paper size register dial is
indicating does not correspond with the size of the loaded paper, this may
result in printer malfunction.
•
Do not use "A4R", "LTRR", and "8.5 x 13".
Step
3
19