Canon Laser Shot LBP3500 Getting Started Manual page 24

When outputting A3 size paper or other long-size paper to the output tray, pull
out the auxiliary tray to prevent the paper from hanging out of the output tray.
When you use the auxiliary tray, gently open it until it stops.
Step
3
IMPORTANT
• Printed paper can be output only to the output tray when performing
automatic 2-sided printing.
•
During 2-sided printing, do not touch the paper until it is output to the
output tray completely. In 2-sided printing, the paper is partially output
once after printed on its surface and is fed again to be printed on its
reverse side.
•
The output tray and its surroundings become hot during or immediately
after using the printer. When taking out of the paper or removing jammed
paper, do not touch the surroundings of the output tray.
NOTE
The output tray can hold up to approximately 250 sheets of plain paper (64
2
g/m ).
24
■ Sub-output Tray
Printed paper is output to the sub-output tray on the rear of the printer unit with
the printed side facing up. Printed paper is stacked with the page order
reversed. The sub-output tray is suitable to print transparencies, labels, or
envelopes that curl easily, since the printed paper is output flattened.