Table of Contents
Advertisement
5.2
Controller home display layout – keys and indicators
Element power
output indicator
Alarm indicator
MW Power
program output
indicators*
Program status
indicator
Not used
Runs, Holds,
Resets the
current
program
Figure 5.2 Controller keys and indicators
*MW power program output indicators:
1
= MW power on in this segment, set on the microwave page.
1 2 = MW power on in this segment, set for each program segment.
Keys
A/Man
-
RUN/HOLD
-
Page key
Scroll key
Arrow keys
Page and scroll
together
Page and up
arrow together
Scroll and up
arrow together
Pressing any other combination of keys together has no effect
Note: If no keys are pressed for 1 minute, the display returns to Home.
MF 55-GB 1.21
EUROTHERM
OP1
ALM
RUN HLD
12
23
1200
RUN/HOLD
A/MAN
Ack
Page
Down
Scroll
Disabled
Runs, Holds or Resets the current program. Hold down for 3
seconds to Reset.
Scrolls through the page headings. Hold down for 3 seconds
to access further levels, pass codes are required.
Scrolls through parameters listed on pages.
+
Adjust parameter values
Press together to return to the home display or to
+
acknowledge an alarm.
+
Press together quickly to scroll back up the page headings
+
Press together quickly to scroll back up a parameter list
Measurement units
°C
Measured temperature
Setpoint temperature
(SP) /Page titles
Control and
program values
Up
MRF 16/22
19
Advertisement
Table of Contents
