Removing/Installing The Cassette Compartment - Sony HDV HVR-1500 Service Manual

2-8. Removing/Installing the Cassette
Compartment
Removal
1. Remove the top panel. (Refer to Section 2-7-1.)
2. Remove the C cable retainer.
3. Remove the flexible card wire from the connector
(CN1) on the CC-83G board.
4. Remove the two screws and remove the cassette
compartment retainer.
5. Remove the cassette compartment n the direction of
the arrow.
Installation
1. Put in the cassette compartment in the opposite
direction of the arrow and align the four positioning
holes with the four positioning pins.
2. Attach the cassette compartment with the two screws.
3. Connect the flexible card wire to the connector (CN1)
on the CC-83G board.
4. Attach the C cable retainer.
5. Attach the top panel. (Refer to Section 2-7-1.)
2-12
C cable retainer
Flexible
card wire
BVTT3 x 6
CN1
CC-83G
board
Positioning
hole
Cassette compartment
retainer
Positioning hole
Cassette
compartment
Positioning
pins
Positioning
holes
Positioning pins
HVR-1500