Sony HDV HVR-1500 Service Manual page 123

5. Connecting the connectors
(1) Connect the harnesses and flexible card wires
to the two connectors (CN10, CN12) on the
DR-428BG board of the back of the chassis.
(2) Connect the flexible card wire to the connec-
tor (CN102) on the RP-133 board.
6. Cleaning the heads and tape running
surface
Clean the tape running surfaces of the drum and
video heads with cleaning cloth moistened with
cleaning fluid.
Adjustment after Replacement
7. Tape path adjustment
(Refer to Section 7-2.)
8. RF switching position adjustment
(Refer to Section 7-3.)
9. EQ adjustment
(Refer to Section 4-3-6.)
HVR-1500
CN10
CN12
CN102
RP-133 board
DR-428BG board
6-7