Sony HDV HVR-1500 Service Manual page 47

< Type C >
Removing method
Raise the portion marked "A" of the connector and release
the lock. Pull out the flexible card wire.
Insertion method
Insert the flexible card wire fully up to the marked line and
push up the portion marked "A" of the connector.
Flexible card wire
Insulation side
A
Connector
Unlocked status
Flexible card wire
A
Connector
Locked status
n
The flexible card wire has the conduction side and the
insulation side. Connect the flexible card wire after
checking for the correct side as shown.
If the condition side and the insulation side are connected
in the wrong direction, the circuit will not operate.
HVR-1500
< Type D >
Removing method
m
. Do not pull the flexible card wire before releasing the
lock.
. The flexible card wire has the conduction side and the
insulation side. Check the conduction side and the
insulation side before disconnection.
1. Move the portion "A" of the connector in the direction
of the arrow A to release the lock. Remove the
flexible card wire.
Insertion method
m
. Confirm that the contacting surface of the flexible card
wire is free from stain and dust.
. Confirm that the lock of the connector is already released.
1. Insert the flexible card wire securely to the deep end.
2. Push in the portion marked "A" of the connector in the
direction of the arrow to lock the connector. Be
careful that the flexible card wire is not slanted with
A
respect to the connector.
Flexible card wire
A
A
Connector
Unlocked status
Flexible card wire
A
Locked status
Conduction side
A
A
2-33