M Stop Solenoid Replacement - Sony HDV HVR-1500 Service Manual

6-9. M Stop Solenoid Replacement

Outline
Replacement
Removing the M stop drive plate assembly
Replacing the M stop solenoid
Installing the M stop drive plate assembly
Preparation
1. Set the unit to the unthreading end status.
2. Power off the unit.
3. Remove the bottom plate assembly. (Refer to Section 2-7-2.)
4. Remove the DR-428BG board. (Refer to Section 6-26-5.)
Tools
. Torque screwdriver's bit (for M1.4) :
. Torque screwdriver bit (for M2) :
. Torque screwdriver (for 3 kgf.cm) :
. Locking compound (Three bond-1401B) :
HVR-1500
J-6325-110-A
J-6325-380-A
J-6325-400-A
7-432-114-11
6-27