Sdi Free-Running Adjustment - Sony HDV HVR-1500 Service Manual

8-4. SDI Free-running Adjustment

(Connection)
HVR-1500
TP
Conditions for adjustment
Step 1
. Extension of the SDI-94 board.
(Refer to Section 2-15.)
. EE mode
. Connect jumper wire between TP101/
SDI-94 (E-2) and E101/SDI-94 (E-1).
. After adjustment, remove jumper wire.
Step 2
. Extension of the SDI-94 board.
(Refer to Section 2-15.)
. EE mode
. Connect jumper wire between TP202/
SDI-94 (D-2) and E101/SDI-94 (E-1).
. After adjustment, remove jumper wire.
HVR-1500
Oscilloscope Frequency counter
Measurement point, Specification
TP102/SDI-94 (E-2)
Spec. : f = 27.0 ± 0.1 MHz
TP201/SDI-94 (D-1)
Spec. : f = 27.0 ± 0.1 MHz
Adjustment
1RV101/SDI-94 (E-1)
1RV201/SDI-94 (D-2)
8-15