Sony HDV HVR-1500 Service Manual page 102

3. EQ MANUAL ADJ
The EQ MANUAL ADJUSTMENT is described below :
n
If any errors are found in the played back picture and audio, or if
"INCOMPLETE" is displayed after completing the EQ AUTO
ADJ in the previous section, this adjustment enables to check the
status of the RF of each HEAD.
1. Select the EQ MANUAL ADJ.
2. Select the mode desired to check using the 9, 0 keys, and
press the 8 key.
n
DVCPRO is factory use. Never change the setting.
3. Insert the cassette of which mode you desire to check into the unit.
DVCAM : 15 u ADJ cassette
10 u ADJ cassette
DV :
4. Press the [PLAY] key.
5. Press the RESET (NO) key to display asterisk mark "*" to
the right side of the DATA : XXXX.
6. Select the HEAD for checking with the 8 key.
n
The HEAD selected is displayed in the ( ) on the top of the
monitor display.
In the case of DVCAM :
Main E → Main O
In the case of DV :
Main E → Main O
7. Confirm that the DATA on the screen is 0000* through
000F*.
n
If press the SET (YES) key during confirmation, perform
the EQ AUTO adjustment.
4-36
HVR-1500