Table of Contents
Advertisement
5-1. Periodic Maintenance
5-1-2. Periodic Replacement and Check Item Table
The replacement time shown in the following table is not the guarantee term of
parts. The replacement time of parts varies depending on the operating environment
and conditions of the unit.
Especially the pinch roller and cleaners, may be required replacing earlier than
replacement period shown in the table depending on the degree of their dirt or
abrasion.
The arrows "↓" and "↑" in the table indicate that the part is included in the assembly
described on the lower/upper line. If the assembly on the pointed line is replaced, the
part is also replaced as a component of the assembly together.
As for the hours meter, refer to Section 5-1-3.
As for replacing each part, refer to the maintenance manual Part 2, Volume-1.
No.
Replacement parts
1
Upper drum
2
Drum assembly
*2
3
Brush slip ring assembly Drum rotating time (H02)
4
Video head cleaner
5
Video head
cleaner assembly
*5 *6
6
AT head cleaner
7
Pinch roller
8
Reel motor
9
Capstan motor
!/
Pinch solenoid
*6
!-
Fan motor (rear)
!=
Fan motor (MD)
