Seat - Permobil K450 Service Manual

Seat

Seat
Removing the seat plate
1. Switch off the main power switch on the
control panel.
2. Remove the two crush guard sensors held in
place underneath the seat plate with two
screws and nuts on both the left and right side.
See illustration.
3. Remove the crush guard held in place
underneath the seat plate with two screws and
nuts on both the left and right side. See
illustration.
4. Remove the seat cushion by lifting it straight
up until the Velcro on the back releases it.
5. Remove the seat plate, which is held in place
by four screws. See illustration.
6. Remove the cable ties that hold the cables at
the back of the seat plate.
Fitting
Fit in the reverse order.
The crush guard sensors are held in place
with two screws and nuts each.
The crush guard is held in place
with two screws each.
The seat plate is held in place with four screws.
46