Permobil K450 Service Manual page 37

3. Remove the cables associated with the
relevant actuator from the General Module.
See illustration.
4. Connect the cables from the actuator with the
emergency operation cable. See illustration.
5. Use the control lever on the emergency
operation cable to operate the function you
have chosen to connect to one of the holes.
See illustration below.
WARNING
Following emergency operation, the relevant actuator
must be recalibrated. Detailed information on
calibration is available in the technical manual for the
ICS control system.
Disconnecting the emergency
operation cable
1. Disconnect the emergency operation cable
from the actuator's cable and from the
charging socket.
2. Reconnect the actuator cable to the general
module.
3. Refit the chassis cover. See page 10.
Emergency operation of seat functions
Remove the cables associated with the relevant
actuator from the General Module.
Connect the cable from the actuator
with the emergency operation cable.
Maneuvering using the emergency operation
cable's control lever.
37