Info - Extron electronics System 5 IP Series User Manual

System switchers with integrated a/v switching, audio amplification, and projector control
Hide thumbs Also See for System 5 IP Series:
Table of Contents

Advertisement

Software- and Web Page-based Setup and Control, cont'd

Info

A GlobalViewer Info page showing a disconnected projector
A GlobalViewer Info page showing a connected projector
• The IP Link Global Viewer window at the left of the screen shows a list of
IP Link-based devices within the network that have Global Viewer Web pages
installed.
• The larger Info window on the right side of the screen displays basic information
about the switcher, its IP settings, firmware version, display/projector
connection status, display power status, and elapsed projector lamp hours.
• Projector or display power connection status is indicated by one of two icons:
• The projector Power Status column indicates whether the projector is on, off,
4-20
System 5 IP • Software- and Web Page-based Setup and Control
connected (
) or disconnected (
the System 5 IP obtains by power polling the display.
warming up, cooling down, or unavailable (either because the projector is
disconnected or because it does not support power polling).
). This status reflects information

Advertisement

Table of Contents
loading

Table of Contents