Appendix A • Reference Material; Specifications; Video Input; Video Output - Extron electronics System 5 IP Series User Manual
System switchers with integrated a/v switching, audio amplification, and projector control
Hide thumbs
Also See for System 5 IP Series:
- Specification sheet (3 pages) ,
- Setup manual (27 pages) ,
- Manual (2 pages)
Table of Contents
Advertisement
Reference Material
Specifications
Video
Gain ............................................... Unity
Bandwidth .................................... 350 MHz (-3 dB), fully loaded
Differential phase error .............. 1º at 3.58 MHz and 4.43 MHz
Differential gain error ................. 1% at 3.58 MHz and 4.43 MHz
Crosstalk ....................................... -68 dB @ 10 MHz, -39 dB @ 100 MHz
Switching speed ........................... <600 ms (max.)
Video input
Number/signal type ................... 1 RGBHV, RGBS, RGsB, RsGsBs
Connectors .................................... (1) 15-pin HD female (RGB)
Nominal level ............................... 1 Vp-p for Y of S-video, and for composite video
Minimum/maximum levels
RGB .................................... Analog: 0.3 V to 1.5 Vp-p with no offset
S-video, composite video Analog: 0.4 V to 2.0 Vp-p with no offset
Impedance .................................... 75 ohms
Horizontal frequency .................. 15 kHz to 145 kHz
Vertical frequency ....................... 30 Hz to 170 Hz
Return loss
RGB .................................... <-40 dB @ 5 MHz
S-video ............................... <-25 dB @ 0 to 10 MHz
Composite video .............. <-40 dB @ 0 to 10 MHz
DC offset (max. allowable) ......... 1.5 V
Video output
Number/signal type ................... 1 RGBHV, RGBS, RGsB, RsGsBs
Connectors .................................... 5 female BNCs (RGB)
Nominal level ............................... 1 Vp-p for Y of S-video, and for composite video
Minimum/maximum levels
RGB .................................... Analog: 0.3 V to 1.5 Vp-p (follows input)
S-video, composite video Analog: 0.4 V to 2.0 Vp-p (follows input)
Impedance .................................... 75 ohms
Return loss .................................... <-40 dB @ 5 MHz
DC offset ....................................... ±5 mV with input at 0 offset
Switching type ............................. Triple-Action
Sync
Input type ..................................... RGBHV, RGBS, RGsB, RsGsBs
Output type .................................. RGBHV, RGBS, RGsB, RsGsBs (follows input)
A-2
System 5 IP Switchers • Reference Material
2 RGBHV, RGBS, RGsB, RsGsBs, S-video, or composite video
2 S-video or composite video
2 x 5 female BNCs (RGB, S-video, or composite video)
2 x 1 female BNC (composite video) and (1) 4-pin mini DIN (S-video)
0.7 Vp-p for RGB
0.3 Vp-p for C of S-video
1 S-video
1 composite video
2 female BNCs (S-video)
1 female BNC (composite video)
0.7 Vp-p for RGB
0.3 Vp-p for C of S-video
™
(RGB delay)
Advertisement
Table of Contents
