Pre-Operation Notes And Details; Control Switches - BraunAbility Entervan II Owner's Service Manual

W ARNING
Read and become
familiar with all safety
precautions, pre-
operation notes and
details, operating
instructions and
manual operating
instructions prior to
operation. Contact
The Braun Corpora-
tion immediately if
this information is not
fully understood.
Failure to do so may
result in serious
bodily injury and/or
property damage.

Control Switches

Color Coding: Entervan II
interior-mounted control switches
are color-coded and function-
labeled to correspond to the color
coding and switch-function labels
that appear on the Power Opera-
tion Instructions decal (posted on
the interior wall panel above the
power door operator).
The color of the symbol corre-
sponds to the color of the switch
to be used. Color coding applies
to the interior-mounted control
switches only.
Triangular-shaped color-coded
symbols appear on the Power
Operation Instructions decal. The
direction of the symbol corre-
sponds with the direction the
switch should be activated
(pressed) to produce the intended

Pre-Operation Notes and Details

The Entervan II provides fully
automatic operation of the
electromechanical "kneeling"
system, the passenger side slide
door and the ramp. Refer to
Entervan II Features and Options
(pages 2 and 3), and referenced
sections in this manual for
identification and explanation of
Entervan features and functions.
Terminology: The term
"KNEEL" appearing within this
manual and on operating instruc-
tions decals is a reference to the
lowering and raising motion of the
Entervan electromechanical rear
function. = Press switch UP,
and = press switch DOWN.
Although the remote control
transmitter OPEN and CLOSE
switches are not color-coded,
the functions activated by remote
control transmitter OPEN and
CLOSE switches are identical to
the functions activated by the
interior-mounted OPEN/CLOSE
switches.
The outside key entry activates
the same functions as the interior-
mounted yellow OPEN/CLOSE
switches and the remote control
transmitter OPEN and CLOSE
switches.
Control switch details are pro-
vided in this section.
suspension. The term "OPEN"
indicates the opening motion of
the power slide door, and
"CLOSE" indicates the closing
motion of the power slide door.
The term "UNFOLD" indicates the
lowering motion of the ramp to
the deployed position. The term
"FOLD" indicates the raising
motion of the ramp to the vertical
(stowed) position.
Contact The Braun Corporation
immediately if any of this informa-
tion is not understood. Call 1-
800-THE LIFT.
W ARNING
Do not activate
control switches when
anyone is near the
area in which door
operates, ramp
operates or vehicle
kneels. Failure to
follow this rule may
result in serious
bodily injury and/or
property damage.
Page 7