Chrysler Easy-Out Roller Rear Bench Seat; Wheelchair And Occupant Restraint - BraunAbility Entervan II Owner's Service Manual

Wheelchair and Occupant Restraint

Read all warnings posted on page 26!
Chrysler Easy-Out Roller™ Rear Bench Seat
The 3-Passenger Rear Bench Seat (standard
Entervan feature) is equipped with Chrysler Easy-
Out Rollers ™ . Refer to your Chrysler owner's
manual for removal and installation instructions for
this seat.
Rear Over-Center Strap
Attachments
1. Position and install the strap's
track fitting below and just to the
inside of the rear wheel as
shown. Pull on fitting to ensure
that it is locked in track. Note:
See steps 2 and 3 on the
opposite page for further track
fitting (keeper) details.
2. Wrap the other end of the strap
around the back of the wheel-
chair frame at a structurally
secure location and attach the
snap hook into the round ring.
Be careful to keep the strap
away from sharp edges or
corners.
3. Pull the tensioning strap until
tight. While maintaining tension,
lift handle, close and lock
handle. Pull on buckle handle to
ensure that it is locked.
4. To release over-center buckle,
simply pull down tensioning strap
towards floor as shown.
W ARNING
Install, remove and
operate Chrysler
Easy-Out ™ seats as
detailed in Chrysler
owner's manual.
Failure to do so may
result in serious
bodily injury and/or
property damage.
Page 29