BraunAbility Entervan II Owner's Service Manual page 33

Front Seat Removal
CAUTION
Do not contact the
ramp when reclining
or moving a passen-
ger seat rearward.
Doing so may result
in property damage.
Connect sockets.
Quick-Release Front Seats
continued
3. Tip seat slightly backwards
and roll seat base out of
vehicle.
Front Seat Installation
1. Roll seat base into position
(aligning the seat base
attachments with the re-
cessed floor strikers).
2. Squeeze the release handles
located at the rear of the
seat bases and rotate
upward to latch the seat
base attachments with the
recessed floor strikers
(receptacles). Rotate the
handles up and fully forward
until the handles reach the
locked position and the
indicator buttons return into
the handles. See photos F,
G and H.
Note: Be certain all seat
base attachments are fully
latched. Read warning on
opposite page!
3. Connect (plug) the electrical
harness sockets.
Fully-Disengaged Seat Attach-
ments (Wheels Deployed)
Lock Indicator Button UP
(Mid-Point of Handle Rotation).
Fully-Engaged Seat Attachments
Page 31
F
G
H