BraunAbility Entervan II Owner's Service Manual page 38

Maintenance and Lubrication Schedule
continued
Inspect Kneel actuator assembly for:
(continued)
• Actuator shaft/chain bearing lock collars for
securement
• Inspect chain for misalignment, wear or
damage (apply * Light Grease)
• Inspect chain cotter pins for securement
• Inspect chain UHMW idler for securement,
wear, damage or misalignment
• Inspect electrical harnesses for positive
connections, proper routing, wear or other
1 Year
damage
or
• Inspect proximity switch mounting screws
1250 • Inspect polyethylene hose for positive
connection, routing, kinks, holes, wear or
Cycles
other damage
• Release cable mounting bracket mounting
bolts securement (loose or missing)
• Release cable securement (turnbuckle
connection at motor, threaded mounting
stud at mounting bracket and all jam nuts)
• Release cable alignment, routing, kinks,
wear, or other damage
Inspect power cable
Inspect ground cable
Decals
Refer to the Maintenance/Lubrication Schedule for recommended applications per number of cycles or elapsed time.
Lubricant
Light Penetrating Oil
* Light Oil
(30 weight or equivalent)
Light Grease
* Light Grease
(Multipurpose)
Page 36
General Inspection
Specified (recommended)
Type
LPS2, General Purpose
Penetrating Oil
* continued
Realign, resecure, adjust, lubricate, replace
defective parts or otherwise correct as needed.
Note: See Kneel Actuator Assembly exploded
view on page 50 also.
Resecure, repair or replace
Resecure, repair or replace
Replace if worn, missing or illegible. See
Decals on pages 52-57.
Available
Lubricant Amount
11 oz.
Aerosol Can
Lubriplate 14 oz.
Braun
Part No.
15807
15805
Can