Page 1
Seat Lockers User Manual Instructions for fitting and use...
Page 2
If you have any questions about your equipment, please contact us. Once again, thank you for placing your confidence in our products! Safe vehicle adaptation solutions For your safety BraunAbility products are designed and tested according to current directives and standards.
Page 3
ULB, ULS Safety information Limitations of use Fit and use Fitting the Seat Locker to the seat leg Operating the Seat Locker After care Equipment storage and maintenance Warranty “Declaration of conformity” at the end of the manual.
Page 6
Finally tighten M10 nyloc nuts and bolts with a torque wrench to a recommended torque of: 35-40Nm (18-22lb/ft) WARNING If it is intended that the seat should face the rear, please contact BraunAbility.
Page 8
ULB, ULS Fit and use Operating the Seat Locker Fitting the seat into the rail Removing the seat from the rail Before locating the seat into the rail, ensure the Seat Locker handles are in the To release the seat from the rail, push fully raised positions.
Page 10
BraunAbility have also participated in test programs with other manufacturers anchorage products and will support warranty on the BraunAbility products when used in conjunction with such jointly tested systems. For further details on specific applications please contact the Sales Office. In other situations, using BraunAbility products, for which BraunAbility has not participated in a joint test program, a limited BraunAbility warranty will apply.