Specifications - BraunAbility Entervan II Owner's Service Manual

The following specifications are basic to the 1996
and newer Chrysler Entervan II.
Weight:
• Overall Weight of Stock Van (depends on type
of van): Approximately 4050 pounds
• Conversion Add-On Weight (depends on type
and options): Approximately 350 pounds
Power source is 12 VDC battery with negative
ground.
Electromechanical Kneeling System incorporat-
ing:
• Factory (OEM) Chrysler leaf springs
• Heavy-duty weatherproof linear actuator with
sealed proximity switch activating the actuator
electric brake
• Industrial four-leaf roller chain
• On/Off Switch
• Electrical override
Power Door Motor:
• Type: Permanent Magnet
• 12 VDC
• Maximum Speed - 105 RPM
• Maximum Torque: 120 inch pounds at 10 RPM
• Approximately 1/50 Horsepower
• Manual release (override)
Power Ramp Motor:
• Type: Permanent Magnet
• 12 VDC
• 3 RPM
• Torque: 1100 inch pounds
• 1/17 Horsepower
• Manual release (override)
The performance data contained within the Opera-
tions Cycle Times Chart provides general perfor-
mance criteria. This information is compiled from
tests conducted on standard Fully Automatic Series
03 1996 and newer Chrysler Entervans meeting the
following constant operational specifications.
Operational Specifications:
• Environmental temperature of 72° F. Extremely
low temperatures can moderately affect cycle
time.
• Fully charged 12 volt DC power source. Low
voltage will moderately affect test results.
• Door and ramp cycles timed with vehicle in
kneeled (lowered) position.
Page 58

Specifications

Operation
Kneel (Down)
Door Open
Ramp Unfold
Ramp Fold
Door Close
Kneel (Up)
Operations Cycle Times
Duration (Min. to Max.)
Actuator Run Time
9.14 sec. to 12.35 sec.
Lower Time only
5.57 sec. to
9.06 sec. to
Motor Run Time only 2.50 sec. to
Fully Deployed 6.86 sec. to 13.79 sec.
4.23 sec. to
8.78 sec. to
8.82 sec. to 11.00 sec.
Actuator Run Time
4.62 sec. to
Raise Time only
7.12 sec.
9.73 sec.
3.60 sec.
4.96 sec.
9.54 sec.
6.03 sec.