Operation With The Rm-Ip10 Ip Remote Controller; Required Equipment - Sony BRC Series System Manual

8
Operation with the RM-IP10 IP Remote
Controller
The BRC-H900, BRC-Z700 and BRC-Z330 can be controlled by the RM-IP10 IP Remote Controller.

8.1 Required Equipment

IP remote controller: RM-IP10
IP control card: BRBK-IP10 (for BRC-H900 or BRC-Z330)
IP control card: BRBK-IP7Z (for BRC-Z700)
You can control up to 112 cameras that are compatible with IP connec-
tion, and you can add up to five IP remote controllers in the same
network.
The joystick of the IP remote controller allows comfortable pan/tilt and
zoom operations.
You can also select the RS-232C or RS-422 connection and operate up
to seven cameras.
Note Select the LAN, RS-232C or RS-422 connection. You cannot use multiple
communication methods simultaneously.
By inserting this card into BRC-H900/Z330, the camera can use an IP
connection.
This card outputs an HD-SDI signal conforming to SMPTE 292 serial digital
interface standards, or outputs an SD-SDI signal conforming to SMPTE
259M serial digital interface standards. An audio signal is not output
from the card.
By inserting this card into BRC-Z700, the camera can use an IP connec-
tion.
This card outputs an HD-SDI signal conforming to SMPTE 292 serial digital
interface standards, or outputs an SD-SDI signal conforming to SMPTE
259M serial digital interface standards. An audio signal is not output
from the card.

Operation with the RM-IP10 IP Remote Controller

43