Other Features - Sony BRC Series System Manual

Simultaneous Control of Multiple Cameras
The RM-IP10 Remote Control Unit can operate up to 112 units of BRC cameras (BRC-H900, BRC-Z700, and
BRC-Z330) though an IP network. The BRS-200 Remote Camera Operating Switcher and the RM-BR300
Remote Control Unit can be used to operate up to seven cameras.
RM-IP10
Remote Control Unit (IP)

Other Features

Flexible installation
The BRC Series can be placed on a desktop, mounted on the ceiling, used with a tripod, or
installed in an outdoor housing kit, depending on your applications.
Flat surface
BRC Series cameras can be ceiling-mounted with a supplied ceiling
Note
bracket and screws. For use with a tripod, the camera has a standard
¼-20 UNC receptor. For the tripod and the outdoor housing kit, please
contact to the regional headquarters.
Multiple presets
The BRC-H900, BRC-H700, BRC-Z700, and, the BRC-Z330 each have sixteen presets and the BRC-300/300P
has six presets to which pre-defined pan/tilt/zoom positions and other parameters can be allocated.
These presets can be recalled at the touch of a button of the BRS-200, the RM-BR300, or the IR remote
commander unit to easily capture video from pre-specified areas.
10
Key Features
RM-BR300
Remote Control Unit (VISCA)
Ceiling Mount
BRS-200
Remote Camera
Operating Switcher
Placed on a tripod
= 4.5 – 7 mm
= 0.18 – 0.27 inches
Outdoor Housing Kit
1
/ -20UNC
4