Adjusting The Camera; Focusing On A Subject; Focus Adjustment - Sony BRC Series System Manual

Movement of the
Joystick
camera
Incline to the right.
Incline to the right.
The setting above only changes the signal emitted
Note
from the RM-BR300 Remote Control Unit, and does
not change any camera settings.
If the STANDBY lamp of the camera flashes
When the camera is moved or turned by hand or
by external shock, the microcomputer inside the
camera my not be able to memorize the pan/tilt
position properly. To reset the pan/tilt position,
press the PAN/TILT RESET button.
STANDBY flashes.
Zooming
Turn the dial on the upper part of the joystick.
Subject appears
farther away.
(Wide angle)
When you perform a pan/tilt operation with a
Note
camera in Telephoto mode, the screen image may
move at an uneven speed.
Setting
While holding down
Press.
While holding down
Press.
Subject appears
closer. (Telephoto)

Adjusting the camera

MODE
SHIFT
VALUE/R BACK LIGHT
FOCUS
BRIGHT/B
ONE PUSH AF

Focusing on a subject

To focus the camera on a subjec
automatically
Press the AUTO/MANUAL button so that the AUTO
Indicator lights.
The camera focuses on the subject in the center of
Note
the screen automatically.
To focus the camera on a subject manually
Press the AUTO/MANUAL button so that the
MANUAL Indicator lights. Then turn the FOCUS
control clockwise or counterclockwise to make the
camera focus on the subject.
Focusing on a near
subject
One-push auto focusing during manual

focus adjustment

Press the ONE PUSH AF button. The camera focuses
on the subject in the center of the screen
automatically.
Backlight Compensation function
When you shoot a subject with a light source
behind it, press the BACK LIGHT button. To cancel
this function, press the BACK LIGHT button again.
The Backlight Compensation function is not effective
Note
if the mode is set to MANUAL in the camera's
EXPOSURE menu.
ONE PUSH AWB
AUTO/MANUAL
Focusing on a far
subject
35
Remote Operation