Radar Overlay; Radar Settings Panel; Mast Rotation - B&G ZEUS Touch Operator's Manual

54 |

Radar overlay

You can overlay the Radar image on the Chart. This can help you to easily interpret the radar
image by correlating the radar targets with charted objects.
When the radar overlay is selected, basic radar operational functions are available from the
Chart panel's menu.

Radar settings panel

Radar symbology
You can turn on/off optional radar symbology individually from the Radar settings page. See
illustration showing optional radar items.
Data bar
Turns on/off the radar data bar. Refer illustration on page 47.
The data bar can show up to 3 targets, arranged with the closest target
on top. You can select to show MARPA targets on top and before any AIS
targets, even if the AIS targets are closer to your vessel.
¼ Note:
The data bar is only available on T8 and T12.
MARPA settings
Allows for adding target trails and guard zone indication around a MARPA target. Refer to
description on previous pages.
Installation
The Installation option is used for Radar installation, described in the separate Zeus Touch
Installation manual.

Mast rotation

If a valid source of mast angle is available on the network, you have the option to correct for
changes in mast angle and/or radar azimuth caused by the rotation of the mast.
This function can be turned on or off in the advanced settings menu as shown below.
Using the radar | Zeus Touch Operator Manual