Operating The Zeus Touch With The Wireless Device - B&G ZEUS Touch Operator's Manual

Operating the Zeus Touch with the wireless device

When remote control is accepted, the Zeus Touch page will be mirrored to the wireless
device.
The Zeus Touch image includes softkeys. Tapping these keys works as operating the similar
hard keys on the Zeus Touch front panel.
Lets you select which Zeus Touch to control if more than one is connected to
the active WIFI-1 unit
Returns to the GoFree Controller page.
Using the WIFI-1 for data bridging
The WIFI-1 can be used for bridging data from the Zeus Touch to other applications running
on a wireless remote device.
The graphics below is an example only, showing setup for the iNavX application run on an
iPhone.
GoFree™ Wireless | Zeus Touch Operatior Manual
| 99