2
Advanced power control
The Zeus Touch can be wired
and configured to control
the power of displays and
compatible devices. See
the Zeus Touch Installation
manual for more information.
GOTO
PAGES
Basic operation
The power key
•
Press and hold:
•
Single press:
•
Repeated
presses:
¼ Note:
If the power key is released before shut-down is completed, the power off is cancelled.
A night mode which optimizes the color palette for low light conditions, is included.
¼ Note:
Details on the chart may be less visible when the Night mode is selected!
When in Standby mode, the backlight for touch screen and keys are turned off to save power.
The system will continue to run in the background and will notify you if an alarm situation
should occur.
You return from Standby mode to normal operation by pressing the power key.
If the radar is transmitting you can set it to standby mode from within the
Using the touch screen
Basic touchscreen operation on the different panels is shown in the table below.
The panel sections later in this manual have more information about panel specific touch
screen operation.
Menu/
Operation
Dialogs
Select/
Tap
toggle item
Tap and hold
Adjust slider
value
Drag
Scroll dialog
¼ Note:
When tapping and holding, a circle will spin around the tap point. Hold till action circle
has completed or until the action is confirmed by a second beep.
Pages and panels
Select pages
You access a page group and then select the page to display from the
Basic operation |
Zeus Touch Operator Manual
Turn unit on/off
Display dialog for light adjustment,
standby mode and radar standby/
transmit
Toggle preset brightness levels (10
- 6 - 3- 1)
Chart
Echo
Place cursor
Display menu for active panel
Pan chart
Pan echo history
(any direction)
(horizontal movement)
Light
dialog.
Panels
Radar
PAGES
panel.
| 11