Using The Simulator; Simulator Mode; Demo Mode; Selecting Simulator Source Files - B&G ZEUS Touch Operator's Manual

21

Using the simulator

Simulator mode

The simulation feature will let you see how the unit works in a stationary position and without
being connected to echosounder, radar, GPS etc.
You can use the simulator to help you become familiar with your unit before using it out on
the water.
When the simulator is toggled on this is indicated in the lower part of
the display.

Demo mode

In this mode the unit automatically runs through the main features of the product; it changes
pages automatically, adjusts settings, opens menus etc.
If you press a key when demo mode is running, the demonstration will pause. After a time-
out period, demo mode will resume.

Selecting simulator source files

You can select which data files to be used by the simulator.
A set of source files is included in your system, and you can
import files by using a Micro-SD card inserted into the units
card reader.
You can also use your own recorded echosounder files in the
simulator.

Advanced simulator settings

The advanced simulator settings allow you to define how to
run the simulator. When the settings are saved these will be
used as default when starting the simulator mode.
GPS source
Selects where the GPS data is generated from.
Speed, Course and Route
Used for manually enter values when GPS source is set
to Simulated course or Simulated route. Otherwise, GPS
data including speed and course comes from the selected
echosounder or radar files.
Set start position
Moves the vessel to current cursor position.
Sailing
Sailing specific simulated data.
104 |
Using the simulator | Zeus Touch Operator Manual