Using Sleep Timer; Timer Priority - JVC UX-J99DVD Instructions Manual

Jvc micro component md system instructions
Table of Contents

Advertisement

Using the Timers

Using Sleep Timer

With Sleep Timer, you can fall asleep to your favorite music.
• You can set Sleep Timer only when the unit is turned on.
How Sleep Timer actually works
The unit automatically turns off after the specified time length
passes.
On the remote control ONLY:
Press SLEEP repeatedly.
The
(timer) and the SLEEP indicators start flashing on
the display.
"SLEEP 10" appears on the display for a while.
• Each time you press the button, the time length changes as
follows:
10
20
Source indication
(canceled)
(timer) and the SLEEP indicators stop
About 5 seconds later, the
flashing and remain lit.
When the Sleep Timer is activated, DIMMER 1 is automatically
activated (see page 12).
To check the remaining time until the shut-off time, press SLEEP
once. The remaining time until the shut-off time appears for about 5
seconds.
To change the shut-off time, press SLEEP repeatedly until the time
length you want appears.
To cancel the setting, press SLEEP repeatedly until the
and SLEEP indicators go off from the display.
Sleep Timer will be also canceled in the following cases:
• When you turn off the unit.
• When you operate other timer settings.
• When you adjust the clock.
75
(continued)
SLEEP
30
60
120
90
(timer)
To sleep with the Sleep Timer and wake up with the Daily
Timer
1 Set the Daily Timer as explained on pages 73 and 74.
2 Start playing back any source you want to listen to before
sleep.
3 Set the Sleep Timer.

Timer Priority

Since each timer can be set separately, you may wonder what
happens if the setting for these timers overlaps.
Below is the example of timer priority.
A timer with the earlier start time has priority.
If Recording Timer is set to come on while Daily Timer is operating,
Recording Timer will not work.
6:00
Daily Timer
Recording Timer
Sleep Timer always has priority.
If Sleep Timer is set to come on while Recording Timer is operating,
Recording Timer will be canceled when the shut-off time of Sleep
Timer comes.
6:00
Sleep Timer
Recording Timer
Sleep timer and Auto Standby (see page 11) can be used at the
same time.
6:30
7:00
7:30
will not start
6:30
7:00
7:30
canceled

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ux-j99dvdahCa-uxj99dvdSp-uxj99dvd

Table of Contents