Recording Disc Onto A Tape -Disc-Tape Synchronized Recording - JVC UX-J99DVD Instructions Manual

To record a single track of a disc (DVD AUDIO/SVCD/VCD/
MP3/CD)/MD during play
On the remote control ONLY:
While playing back a track of a disc or MD
you want to record, press TAPE REC.
The playback of the track is stopped, and the same track starts
playing from the beginning again. This time, the cassette deck starts
recording the track.
• After the track is recorded, both playback and recording stop
automatically.
To record from the desired track
Select the track before playback, then press TAPE REC.
To change the information shown on the display
On the remote control ONLY:
Press DISP/CHARA.
• Each time you press the button, the information on
the display alternates between the recording
indication and the clock indication.
When recording a disc or an MD
• A 4-second blank is automatically made on the tape before each track. To
record without the blank, press DVD 3 then DVD 8, or MD
step 1 , then press TAPE REC.
• When the front side of the tape ends in the middle of a track, the recording
on the reverse side starts from the beginning of that track (if the reverse
mode is set to ).
Recording Disc onto a Tape
—Disc-Tape Synchronized Recording
1
Load discs into the 5-DVD changer.
• If the current playing source is not "DISC," press DVD 3 (or
#¥8 DVD on the unit) then 7 before going to the next step.
• You can make a program (see page 21) or select Random Play
(see page 22) if you want. = Go to step 3 .
On the remote control ONLY:
2
Press DISC UP or DISC DOWN to select the disc
you want to record, then 7 before going to the
next step.
3
Put a recordable cassette into the cassette loading
slot.
4
Press REV.MODE to select a reverse
mode.
• Each time you press the button, the reverse mode changes as
follows:
Records on
one side
* will be shown during recording when you select
• If you have selected Program Play or Random Play, go to step
6 .
5
Press CD REC MODE to select the
recording mode.
• Each time you press the button, recording mode
changes as follow:
DISC REC
DISC REC 1 DISC
twice in
DISC REC ALL DISC
DISC REC BEST HIT
6
Press TAPE REC.
• When you select the recording mode in step 5 ,
press the button while the selected recording mode is still
shown on the display.
The recording starts and the REC (tape recording) and tape
direction indicators start flashing on the display.
C D
1 2 3 4 5
C D
1 2 3 4 5
Current tray number
Records on both
sides once
DISC REC
1 DISC ALL DISC
DISC REC
BEST HIT
Records one selected disc. The
recording stops when the disc
playback stops.
Records all discs loaded on the disc
tray. The recording starts from the
selected disc tray, and it stops when
all of the loaded discs are recorded.
Records the first track of loaded
discs. The recording starts from the
selected disc tray, and it stops when
the first tracks of all the loaded discs
are recorded.
TAPE
REC
Current track number
TAPE
REC
Elapsed playing time
*
.
52