Erasing Tracks In A Group-Erase Gr - JVC UX-J99DVD Instructions Manual

Erasing Tracks in a Group—ERASE GR
This function allows you to erase a group together with tracks in the
group.
You cannot resume the tracks in the erased group.
Once a group is erased, the other tracks and groups are renumbered.
• To stop any time during the editing process below before step 6 ,
press GROUP TITLE EDIT.
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Press GROUP TITLE EDIT repeatedly
until "ERASE GR ?" appears on the
display.
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• If the loaded MD has no group, you cannot go to the following
steps.
• During playback:
The group number of the currently playing track will appear. If
the track does not belong to any group, the group number will
be indicated as "– –."
4
Press GROUP/TITLE >> I or
GROUP/TITLE I << to select the
group you want to erase.
Ex.: When group 6 is selected.
5
Press SET.
• To cancel the setting, press CANCEL, then repeat from step 4 .
6
Press ENTER.
"EDITING" appears and the REC (MD recording)
indicator flashes on the display. Then "WRITING" also
flashes while editing you have made is being recorded
on the MD.
62