Recording Onto A Tape - JVC UX-J99DVD Instructions Manual

Recording on a Tape

Recording onto a Tape

You can use only type I tapes for recording.
1
Prepare the source to record from.
To record from a disc:
(1) Load discs into the 5-DVD changer.
• If the current playing source is not "DISC," press
DVD 3 (or #¥8 DVD on the unit), then 7 before going
to the next step.
• You can make a program (see page 21) or select Random
Play (see page 22) if you want. = Go to step 2 .
(2) Press DISC UP or DISC DOWN to select a disc to record,
then 7 before going to the next step.
To record from an MD:
Insert an MD into the MD loading slot.
• If the current playing source is not "MD," press MD
7 before going to the next step.
• You can make a program (see page 39), select Random Play
(see page 40) or Group Play (see page 40) if you want.
To record from FM/AM broadcasts:
(1) Press FM/AM/AUX (or FM/AM on the unit) to select
either "FM" or "AM."
(On the remote control)
(2) Tune in to a preset station you want (see page 14).
To record from external equipment:
(1) Press FM/AM/AUX (or AUX on the unit) to select "AUX"
or "AUX-DIGITAL."
(On the remote control)
(2) Prepare the external equipment to play.
• Adjust the audio input level if necessary (see page 44).
• For operation of the external equipment, see the manuals
supplied with it.
2
Put a recordable cassette into the cassette loading
slot.
51
(Continued)
On the remote control ONLY:
3
4
, then
AUX
FM/AM
(On the unit)
AUX
To stop recording, press 7.
FM/AM
(On the unit)
Press REV.MODE to select Reverse
Mode.
• Each time you press the button, Reverse Mode changes as
follows:
Records on both
Records on
sides once
one side
* will be shown during recording when you select
Press TAPE REC.
The REC (tape recording) and tape direction
indicators start flashing on the display.
TAPE
REC
Ex.: When you record an FM broadcast.
When the source is "FM" or "AM," recording starts.
When the source is "DISC" or "MD," playback and recording
start—Synchronized Recording.
When the disc or MD player stops, recording also stops
automatically.
• You cannot use ¢ or 4 while recording.
When the source is "AUX" or "AUX-DIGITAL," playback
starts after "AUX = TAPE" (for AUX) or "AUX-D = TAPE"
(for AUX-DIGITAL) appears on the display.
• When you select a track by pressing ¢ or 4 before
pressing TAPE REC, recording starts from the selected track
(except when Program Play is selected).
• When recording from an external equipment, start playback
after "AUX = TAPE" (or "AUX-DIGITAL") appears on the
display.
*
.