Loading Discs; Playing Back All The Discs-Continuous Play - JVC UX-J99DVD Instructions Manual

Playing Back Discs on the 5-DVD Changer

Loading Discs

On the unit ONLY:
1
Press one of the disc eject buttons (DISC10 –
DISC50) for the disc tray you want to load a disc
onto.
The unit automatically turns on and the selected disc tray comes
out if it is unlocked. For details, see "Prohibiting Disc
Ejection—Disc Lock" on page 23.
DISC10 DISC20
• Disc tray is counted from bottom to top. The bottom tray is
disc tray 1 and the top tray is disc tray 5.
2
Place a disc correctly on the circle of the disc tray,
with its label side up.
• When using a CD single (8 cm), place it on the inner circle of
the disc tray.
• When using a two-sided disc, usually place it with side-A
facing up.
3
Press the same disc eject button (DISC10 –
DISC50) you have pressed in step 1 .
The disc tray closes.
DISC10 DISC20
When loading more than one disc at a time
Press the disc eject button (DISC10 – DISC50) for the next tray you want
to place a disc onto. The first disc tray automatically closes and the next disc
tray comes out.
Playing Back All the Discs—Continuous Play
You can play discs continuously.
1
Load discs into the 5-DVD changer.
• See "Loading Discs."
17
DISC30 DISC40 DISC50
Good
Not good
DISC30 DISC40 DISC50
2
Press DISC UP or DISC DOWN (or DISC
SELECT on the unit) repeatedly to select the disc
you want.
(On the remote control)
Playback starts from the first track of the selected disc.
Ex.: When CD is a playing source.
Current disc type
C D
1 2 3 4 5
Disc tray number
Disc indicator and
disc tray indicators
• You can also select a disc and start continuous play while a source
other than "DISC" is selected (see page 18).
• You can also select and start playback a desired track of the
selected disc (see "To go to another title or group," "To go to
another chapter" on page 18 and "To go to a particular title,
group, chapter or track directly using the number buttons" on
page 19).
• Without selecting the disc number, pressing DVD 3 ( or #¥8
DVD on the unit) starts playing back the currently selected
disc.
To pause playback, press DVD 8 ( or #¥8 DVD on the unit).
While pausing, the elapsed playing time flashes on the display.
• To start playback again, press DVD 3 ( or #¥8 DVD on the
unit).
To stop playing, press 7.
• This unit can store the stop point, and when you start playback
again by pressing DVD 3 ( or #¥8 DVD on the unit), playback
starts from the position where you have stopped—Resume Play.
("RESUME " appears on the display.)
To use Resume Play, you need to turn on the Resume function.
(See page 79.)
– The Resume function does not work for CDs, MP3 and JPEG
discs.
– When using the Resume function on SVCD or VCD with PBC,
the playback might start on a position slightly different from
where you have stopped.
• To stop completely when you use the Resume function, press 7
twice.
When you select another disc tray
The stored position where you have stopped will be erased.
(Continued)
DISC
SELECT
‹ 8
/
DVD
(On the unit)
Current track number
Elapsed playing time