Accessories And Spares (To Order); Warranty; Maintenance - AEMC C.A 5205 User Manual

7-5-2 Electromagnetic compatibility : conforms to CE
Emission (EN 50081-1)
7-5-3 Mechanical protection
Degree of watertightness (IEC 529) : protection index IP 40
Use the designations and references below.
C.A 5205 ....................................................................... Cat# 2116.73
Supplied with its shockproof case, a pair of leads with probes attached,
two 1.5 V "AA" batteries and this user's manual
Accessories and spares
AC current probe model MN 251 (200 A AC) ........... Cat# 2115.77
AC current probe model MD 303 (500 A AC) ........... Cat# 1201.21
AC current probe model SR 652 (1000 A AC) .......... Cat# 2113.46
AC/DC current probe
model MR 410 (400 A AC / 600 A DC) ..................... Cat# 1200.70
AmpFLEX model 1000-24-1-1(1000 A AC) ................... Cat# 2112.39
Replacement leads ................................................... Cat# 2118.66
Soft carrying case ..................................................... Cat# 2118.65
Replacement shockproof case .................................. Cat# 2980.15
Our guarantee is applicable for three years after the date on which
the equipment is made available (copy available on request).
For maintenance, use only specified spare parts.
The manufacturer will not be held responsible for any
accident occurring following a repair done other than by
its After Sales Service or approved repairers.
10-1 Replacing the batteries
The multimeter must be disconnected from any electrical
source.
Place the selector switch on the " OFF " position.
Unscrew the tool release screws and remove the lower half of the
case.
Replace the dead batteries by two " AA " 1.5 V batteries (type LR6
or R6)
Refit the lower half of the case
8 - TO ORDER

9 - WARRANTY

10 - MAINTENANCE

7
Immunity (EN 50082-1)