Chapter 3 — Configure the Computer
Configure the Computer Remotely with
SmartSystems
About Network Communications
50
3 When prompted, tap Yes to restore the default settings.
If you are prompted to refresh the computer, tap Yes.
You can use Intermec Settings from a SmartSystems console to
remotely configure all the Intermec computers. For help using
Intermec Settings, click Help > Contents. For information on all the
parameters in Intermec Settings, see the
Command Reference
1 In the SmartSystems console, select a computer and then
right-click on it. A list appears.
2 Select Start Intermec Settings.
3 Configure the settings you want to change. As you select
parameters, help for each parameter appears in the upper right
pane.
4 When you are done making changes, select File > Save Settings.
You can use the mobile computer in your wireless or wired data
collection network. You can connect your computer using:
•
802.11 radio communications.
Ethernet communications.
•
•
Bluetooth communications.
•
USB and serial communications.
Intermec Settings
Manual.
CK3R and CK3X Mobile Computer User Manual