Table of Contents
Advertisement
Field Service Ver2.0 Aug.2005
2.1.2
Removing and reinstalling the feed roller unit
A. Procedure
[1]
[4]
[1]
[2]
[7]
[4]
[2]
[3]
15ssf2c003na
[3]
[8]
[5]
[6]
15ssf2c004na
1. Open the upper door [1].
2. Release the hook [3] of the spring [2] from the
paper feed guide plate [4].
3. Remove the C-clips [1], 1 each.
4. Slide the bearings [2], 1 each, to the outside.
5. Remove the coupling [5] while releasing the notch
[3] and the arm [4] of the paper feed guide plate,
and then remove paper feed roller unit [6].
Note
• When removing and reinstalling it, be careful
not to damage the upper limit sensor (PS109)
[7] and the paper empty sensor (PS108) [8].
6. Reinstall the above parts following the removal
steps in reverse.
2. PERIODIC CHECK
5
Advertisement
Chapters
Table of Contents
