Checking Screen Data - Omron NT31 Setup Manual

System Maintenance

6-11-6 Checking Screen Data

Reference:
Setting Item
Display of Lamp/ Allows designation of whether the bit number of the lamp bit set for a lamp or touch
Touch SW No. switch is displayed or not.
The display format is as follows L@❍❍❍❍❍❍❍ (@: area type, ❍❍❍❍❍❍❍: bit number).
Display of Memory Allows designation of whether the table numbers of numeral and character string mem-
Table No. ory tables are displayed or not.
The display format for numeral memory tables is N❍❍❍❍ and the display format for
character string memory tables is S❍❍❍❍.
This function is valid for the following display elements.
- Numeral displays
- Character string displays
- Bar graphs
- Numeral setting input fields (including thumbwheel type)
- Character string input fields
Display of image/ Allows designation of whether image/library code numbers are displayed or not.
Library No.
Display of Broken Allows designation of whether or not broken line frames are displayed around the dis-
Line Frame play elements for showing the positions registered.
* Default (factory) setting
202
Example Print-out
All of the recorded data is printed out in the same order as on the currently
displayed screen.
Example:
Sort by occurrence method, from oldest record
No. Comment
1 Remote I/O Error
2 PIC Unit Error
3 Cycle Time Over
The NT31/NT31C allows the registered screens (Nos. 1 to 3999) to be dis-
played and checked by operation from the System Menu.
• Window screens cannot be displayed by operation from the System
Menu.
• Only the user screens (Nos. 1 to 3999) can be displayed. Screens for sys-
tem use cannot be displayed.
Specifying The Display Method
Specify the display method for the screens as indicated in the table below.
Function
Press Quit.
The NT31/NT31C returns to the ALARM
HISTORY MENU screen.
YY/MM/DD HH:MM 01/01
98/02/06 16:02
98/02/07 09:21
98/02/17 15:44
Section 6-11
Setting
Options
ON, OFF*
ON, OFF*
ON, OFF*
ON, OFF*