NS10/NS8 Data Initialize Screen
NS5 Data Initialize Screen
6-2-1
Downloaded from
Elcodis.com
electronic components distributor
Page 1
Screen Data Area Format
This function formats the PT screen data. Screen data must be formatted if it is corrupted
and cannot start up properly. The data recorded for the operation log, alarm history, data log,
and error log is not initialized when screen data is formatted.
Before formatting screen data, check that the screen data has been backed up
Precautions
for Safe Use
from the CX-Designer.
6-2 Initializing and Saving Data and Removing the Memory Card
Page 2
6-11