Checking The Pt Setting Status - Omron NT31 Setup Manual

System Maintenance

6-11-3 Checking the PT Setting Status

Screen Configuration and
Display Contents
The direct connection settings of the NT31/NT31C screen data, and the set-
tings for serial port A and serial port B, can be checked.
There are the following three PT setting status screens.
[ ] (next screen)
[ ] (previous screen)
[ ] (next screen)
[ ] (previous screen)
Display Contents of The First Screen
Item
Screen Data Type The host type set for the screen data
PT Control Area Word at the host to which the PT status control area is allo-
cated
PT Notification Area Word at the host to which the PT status notify area is allo-
cated
Window Control Area Word at the host to which the window control area is allocated
Numeric Expression Default for the method of interpretation of the contents of host
words to which numeral memory tables are allocated (numeric
value storage method).
Expansion I/F Type of Unit installed at the expansion interface connector
Compatibility Sets whether or not to use NT30/620 compatible mode for
screen data. (Sets whether to operate as a normal NT31/631
or emulate many key NT30/620 characteristics.)
Display Contents of The Second Screen
Item
Comm. Port A Communications type set for serial port A (fixed as RS-232C)
Comm. Method Communications method set for serial port A
Comm. Setting Communications conditions set for serial port A (display con-
tents differ according to the communications method)
Display Contents of The Third Screen
Item
Comm. Port B Communications type set for serial port B (RS-232C/RS-
422A)
Comm. Method Communications method set for serial port B
Comm. Setting Communications settings set for serial port B (display con-
tents differ according to the communications method)
Section 6-11
[ ] (next screen)
[ ] (previous screen)
Meaning
Meaning
Meaning
197