York Fitness G-570 Instruction Manual page 21

INSTRUCTION
Attach one end of PEC CABLE (120) inside the small
bracket on the side of the right CAM ASSEMBLY (14)
using the bolt, washers and nuts as illustrated.
Pass PEC CABLE (120) around the back of the FRONT MAIN POST (6)
before attaching the other end inside the small bracket on the side of
the left CAM ASSEMBLY (14) using the bolt, washers and nuts as illustrated.
Mount 2 x PULLEY WHEELS (84) with PULLEY COVERS (85)
under PEC CABLE (120) to the 2 brackets on either side of
the FRONT MAIN POST (6) using the bolts and washers
as illustrated.
Now mount PULLEY WHEEL (84) with 2 x PULLEY COVERS (85)
above the loop of cable behind FRONT MAIN POST (6) and pass one
end of ANGLED DOUBLE PULLEY BRACKET (37) either
side from under PEC CABLE (120) and attach using nut, bolt and washers
as illustrated.
59
M10 X 30mm HEX HEAD BOLT X
52
M10 X 45mm HEX HEAD BOLT X
58
M10 X 50mm HEX HEAD BOLT X
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY
17
120
PEC CABLE
2
52
2
1
PEC CABLE 2695mm LONG X
5 8
84
85
70
70
10.5mm X 23mm X 2mm
FLAT WASHER X
68
M10 NYLON
LOCKNUT X
1
2 5
70
85
84
85
4 8
70
58
ANGLED
DOUBLE
PULLEY
BRACKET
7 3
8
3
85
85
8 6
70
YORK G570 / 19