INSTRUCTION
Secure LOWER HEIGHT ADJUSTER (24)
to the threaded pin of the PRESS PULLEY BRACKET (22)
using the nut, bolt and washer illustrated.
NOTE: Ensure the pivot bush of LOWER HEIGHT
ADJUSTER (24) is facing towards the front.
Screw the SPRING LOADED PULL/TWIST PIN (77)
into the assembly as illustrated.
Pull out SPRING LOADED PULL/TWIST PIN (77) and
Slot UPPER HEIGHT ADJUSTER (25) into the top of
the LOWER HEIGHT ADJUSTER (24) releasing
the pin to secure in the bottom adjustment hole.
NOTE: When inserting UPPER HEIGHT ADJUSTER (25)
ensure the single bushed hole is at the top.
68
M10 NYLON
1
LOCKNUT X
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY
11
70
10.5mm X 23mm X 2mm
2
FLAT WASHER X
UPPER HEIGHT
ADJUSTER
MAKE SURE The
warning "Max." is
facing outwards.
70
LOWER
HEIGHT
ADJUSTER
25
M ax .
SPRING
LOADED
PULL/TWIST
PIN
77
24
70
68
YORK G570 / 13