York Fitness G-570 Instruction Manual page 19

INSTRUCTION
Screw the SPRING LOADED PULL/TWIST PIN (77) into
PULLEY GLIDE BRACKET (34) as illustrated.
Pull out SPRING LOADED PULL/TWIST PIN (77) and
Slot PULLEY GLIDE BRACKET (34) onto
HIGH/LOW SUPPORT TUBE (33) releasing
the pin to secure in the centre adjustment hole.
NOTE: The PULLEY GLIDE BRACKET (34) has
a flat edge inside, ensure you align this with the flat side
of the HIGH/LOW SUPPORT TUBE (33) before
attempting to slot in place.
Attach bottom of HIGH/LOW SUPPORT TUBE (33) to
front left side of REAR BASE STABILIZER (1) using
the bolts, washers and nuts as illustrated.
56
M10 X 70mm HEX HEAD BOLT X
70
10.5mm X 23mm X 2mm
4
FLAT WASHER X
68
M10 NYLON
2
LOCKNUT X
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY
15
2
PULLEY GLIDE
BRACKET
68
68
70
70
70
56
34
77
SPRING
LOADED
PULL/TWIST
PIN
HIGH/LOW
33
SUPPORT
TUBE
70
56
YORK G570 / 17