York Fitness G-570 Instruction Manual page 17

INSTRUCTION
Mount the SEAT ADJUSTING BRACKET (28)
to the centre hole of the SEAT SUPPORT (27) using
the nut, bolt and washers as illustrated.
Attach the rear hole of SEAT SUPPORT (27) to
the front hole of SEAT GLIDE ASSEMBLY (18)
top bracket using 2 x SPACER (111), nut, bolt and
washers as illustrated.
NOTE: Ensure the bolt passes first through one
side of SEAT SUPPORT (27), then
through 1 x SPACER (111) before passing
through SEAT GLIDE ASSEMBLY (18),
2 SPACER (111) and out the other side
nd
of the SEAT SUPPORT (27).
Secure the front of the SEAT SUPPORT (27) by
passing PULL PIN (81) through SEAT ADJUSTING
BRACKET (28) and the bush on top SEAT GLIDE ASSEMBLY (18).
46
M10 X 165mm HEX HEAD BOLT X
68
SEAT
SUPPORT
68
70
27
28
SEAT
ADJUSTING
BRACKET
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY
13
2
70
70
46
111
SPACER
68
M10 NYLON
LOCKNUT X
111
80
70
10.5mm X 23mm X 2mm
2
4
FLAT WASHER X
YORK G570 / 15