York Fitness G-570 Instruction Manual page 11

INSTRUCTION
Align BENCH SUPPORT TUBE (19)
(with the slot towards the front) inside top
front bracket of FRONT CROSS SUPPORT (2)
and attach the RIGHT REAR SEAT SUPPORT (21)
and LEFT REAR SEAT SUPPORT (20)
using bolt, washers and nut as illustrated.
Slot the SEAT GLIDE ASSEMBLY (18) onto
the BENCH SUPPORT TUBE (19) and screw
the SPRING LOADED PULL/TWIST PIN into
the assembly as illustrated.
NOTE: Align SEAT GLIDE ASSEMBLY (18) with
the upper bracket facing towards the rear.
46
M10 X 165mm HEX HEAD BOLT X
70
10.5mm X 23mm X 2mm
2
FLAT WASHER X
18
SEAT GLIDE
ASSEMBLY
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY
8
1
68
M10 NYLON
1
LOCKNUT X
68
RIGHT REAR
SEAT SUPPORT
19
BENCH
SUPPORT
TUBE
SPRING LOADED
PULL/TWIST PIN
70
21
70
20
LEFT REAR
SEAT SUPPORT
YORK G570 / 09
46