York Fitness G-570 Instruction Manual page 18

INSTRUCTION
Pass bolt end of TOP PULL CABLE (119) from underside up
through slot at front of FRONT TOP CROSS SUPPORT (10)
and fix PULLEY WHEEL (84) behind cable using nut,
washers, bolt and spacers as illustrated.
Pass bolt end of TOP PULL CABLE (119) from top through
middle slot in FRONT TOP CROSS SUPPORT (10) and
fix PULLEY WHEEL (84) under cable to 1 pulley bracket
using nut, washers and bolt as illustrated.
Return TOP PULL CABLE (119) up through next slot in
FRONT TOP CROSS SUPPORT (10) before slotting it
from top back down through centre hole at rear and screwing bolt end
into top of SELECTOR STEM (8) (screw 5 turns only at this point).
Fit PULLEY WHEEL (84) under TOP PULL CABLE (119) to
the second bracket using bolt, washers and nut as illustrated.
Now mount PULLEY WHEEL (84) with 2 x PULLEY COVERS (85)
above the loop of cable under FRONT TOP CROSS SUPPORT (10)
and pass one end of PULLEY BRACKET PLATE (38) either side
from under TOP PULL CABLE (119) and attach using nut, bolt
and washers as illustrated.
TOP PULL CABLE
68
70
112
START
HERE
112
112
PULLEY WHEEL
2
SPACER X
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY
YORK G570 / 16
14
st
68
70
68
70
70
57
57
58
68
84
68
70
38
58
M10 X 65mm HEX HEAD BOLT X
M10 X 50mm HEX HEAD BOLT X
70
10.5mm X 23mm X 2mm
M10 NYLON
FLAT WASHER X
4
LOCKNUT X
85
84
70
58
70
58
70
1
3
8
85